围压下固体推进剂的破坏机理分析

贴壁浇筑的固体发动机推进剂药柱在点火状态下处于三向围压状态,而环向承受拉应变,亟待对围压下推进剂的破坏机理展开研究。基于自研的围压加载试验系统,通过开展推进剂在不同围压、温度和应变率下的单轴拉伸试验来研究围压、温度和应变率的耦合作用对推进剂力学行为的影响。针对围压下推进剂的力学响应特征,通过细观力学仿真进一步研究围压下推进剂的破坏形式,同时借助电镜扫描试验分析推进剂试样断面的形貌特征,通过试验和仿真相结合的手段分析了围压下推进剂的破坏机理。研究结果表明,围压下推进剂的损伤界面显著减少,且随着围压载荷的逐渐增加,推进剂的损伤形式从以颗粒脱湿为主转变为以颗粒破碎为主。     

On the behavior and shape of mixture failure rates from a family of IFR Weibull distributions

Populations of many types of component are heterogeneous and often consist of a small number of different subpopulations. This is called a mixture and it arises in a number of situations. For example, a majority of products in industrial populations are mixtures of defective items with shorter lifetimes and standard items with longer lifetimes. It is a well‐known result that distributions with decreasing failure rates are closed under mixture. However, mixtures of distributions with increasing failure rates are not easily classifiable. If the subpopulations involved in the mixture have increasing failure rates, there might be some upward movement in the mixture and later a general downward pull towards the strongest component. Little work has been done in describing the shape of mixture failure rates when all subpopulations do not have decreasing failure rate. In this paper, we present general results that describe the shape and behavior of a failure rate of a mixture obtained from two Weibull subpopulations with strictly increasing failure rates. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

大学生就业心理机制及其偏差归因分析

该文通过对大学生就业心理机制维度构成及就业心理偏差原因的分析,提出了纠正就业心理偏差的应对方案。     

潜在故障状态可测的一种故障检查模型

从系统的功能故障状态和潜在故障状态两方面讨论了故障检查模型,基于延迟时间模型推导了系统的期望可用度模型并对其适用性进行了讨论与验证。     

精确保障的理论研究与发展

根据未来信息化战争的新特点,探讨了适应信息化战争保障需求、基于信息网络技术、资源重构技术、柔性保障机制和系统理论的精确保障的内涵,研究归纳出当今美军装备保障的特点、提出精确保障的理论研究应该充分借鉴系统理论、网络中心战理论、敏捷制造理论的先进思想,指出了我军精确保障实现的途径以及应该遵循的原则.     

基于作战任务的多机种故障备件需求模型

通过分析战时故障备件的需求特点,对备件的工作时间进行讨论,改进了传统的单机故障备件需求模型。根据多机种协同作战任务的不同,引入备件工作运行比的概念,在考虑飞机是否战损的前提下,建立了基于作战任务的多机种故障备件需求模型。算例分析证明了模型的有效性。     

回归再时效7A60铝合金在0.5mol/L NaCl溶液中的点蚀性能

采用腐蚀电化学的点蚀极化曲线并结合腐蚀形貌的扫描电镜分析的方法,研究了回归再时效(RRA)工艺处理7A60铝合金在0.5mol/L NaCl溶液中的点蚀行为,对其耐点蚀性能进行了评价,并探讨了RRA工艺改善该合金点蚀性能的机理。结果表明:采用120RRA工艺(120℃×24h预时效+195℃×0.5h回归+120℃×24h再时效)处理后,7A60铝合金在0.5mol/L NaCl溶液中的阳极极化曲线闭合环面积减小,再钝化电流密度Ipp降低,蚀孔较浅,RRA工艺在一定程度上改善了该铝合金在0.5mol/L NaCl溶液中的耐点蚀性能。     

埋入式抗滑桩支护边坡稳定性分析

为研究埋入式抗滑桩在滑坡治理中的适用性,总结前人经验并经大量现场调查研究,提出埋入式抗滑桩支护的3种失效模式,即桩后滑体整体失稳、桩顶滑体越顶失稳和桩前滑体滑移失稳;并从失效模式入手,简化埋入式抗滑桩支护边坡稳定性分析模型。结合定点剪出的破坏假定,用传递系数法分别验算桩周3部分土体即桩后土体、桩顶土体和桩前土体的稳定性。最后在埋入式抗滑桩支护边坡稳定性分析模型的基础上,围绕滑体几何形态、滑面倾角、滑带及滑体力学性质等关键因素,对埋入式抗滑桩的适用条件进行探讨。研究表明:埋入式抗滑桩置于平缓段有利于其阻隔作用的发挥,保证桩前滑体的稳定性;置于滑体强度大于滑带强度的滑坡,有利于利用滑体较高的土工参数;置于坡面平缓的滑坡,有利于桩顶滑体的稳定。     

单一来源同类装备价格形成机制存在的问题及对策

近年来,随着国防和军队全面深化改革的深入推进和装备建设的快速发展,装备价格管理工作的重要性不断提升,但军队目前承担的装备审价任务日趋繁重,存量不减、增量日增等新情况和新问题给装备价格管理工作带来了新挑战。本文以单一来源同类装备为研究对象,借鉴《军品定价议价规则(试行)》中竞争议价和征询议价不审价的原理,从单一来源同类装备价格的形成主体、装备审价任务量、装备价格的测算方法、装备价格的形成过程以及装备价格的影响因素等五个方面分析了价格形成机制存在的问题,并从主观因素和客观因素两方面探讨了存在问题的原因,提出应在明确价格形成主体的职能权限、科学确定价格的测算方法、完善价格法律法规、建设价格数据平台、加强价格人才队伍建设等方向优化单一来源同类装备价格形成机制的对策建议。     

Experimental investigation on enhanced damage to fuel tanks by reactive projectiles impact

Enhanced damage to the full-filled fuel tank,impacted by the cold pressed and sintered PTFE/AL/W reactive material projectile(RMP)with a density of 7.8 g/cm3,is investigated experimentally and theoretically.The fuel tank is a rectangular structure,welded by six pieces of 2024 aluminum plate with a thickness of 6 mm,and filled with RP-3 aviation kerosene.Experimental results show that the kerosene is ignited by the RMP impact at a velocity above 1062 m/s,and a novel interior ignition phenomenon which is closely related to the rupture effect of the fuel tank is observed.However,the traditional steel projectile with the same mass and dimension requires a velocity up to 1649 m/s to ignite the kerosene.Based on the experimental results,the radial pressure field is considered to be the main reason for the shear failure of weld.For mechanism considerations,the chemical energy released by the RMP enhances the hydrodynamic ram(HRAM)effect and provides additional ignition sources inside the fuel tank,thereby enhancing both rupture and ignition effects.Moreover,to further understand the enhanced ignition effect of RMP,the reactive debris temperature inside the kerosene is analyzed theoretically.The initiated reactive debris with high temperature provides effective interior ignition sources to ignite the kerosene,resulting in the enhanced ignition of the kerosene.